KIL-Bronze

MATERIAL:
Phosphorbronze, CuSn 6 or CuSn 8, total acid resistance, zinc & iron free, hardness approx 200-230 HB

STANDARD DIMENSIONS:

THICKNESS		WIDTH
mm	(inch)	mm	(inch)
0.8	(0.032)	50 & 75	(2&3)
1.2	(0.048)	50 & 75	(2&3)

KEY FEATURES:
Continuous length to individual specification
Rolled Surface, even and perfectly straight
Bevel Angle from 18 deg to 90 deg
Rebate or groove

RIVETING Ready for use with rivets, clips and washers. Profiles suit all holder systems

KIL-Carbon Steel

MATERIAL:
Carbon steel C=0.75%, hardness approx. 46-48 HRC
Carbon Steel C=1.00%, hardness approx. 52-55 HRC

STANDARD DIMENSIONS:

THICKNESS		WIDTH
mm	(inch)	mm	(inch)
0.8	(0.032)	50 &75	(2&3)
1.2	(0.048)	50, 75	(2&3)

KEY FEATURES:
Continuous length to individual specification
Hardened, tempered, rolled, even and perfectly straight
Bevel Angle from 18 deg to 90 deg
Rebate or groove

RIVETING Ready for use with rivets, clips and washers. Profiles suit all holder systems

KIL-HTSS

MATERIAL:
Stainless steel (13%) 1.4021, hardness approx 46-48 HRC
Stainless steel (18%) 1.4310, hardness approx 46-48 HRC

STANDARD DIMENSIONS:

THICKNESS		WIDTH
mm	(inch)	mm	(inch)
0.8	(0.032)	50 & 75	(2&3)
1.2	(0.048)	50, 75	(2&3)

KEY FEATURES:
Continuous length to individual specification
Hardened, rolled, even and perfectly straight
Bevel Angle from 18 deg to 90 deg
Rebate or groove

RIVETING Ready for use with rivets, clips and washers. Profiles suit all holder systems

KIL-Monel

MATERIAL:
Ni Cu 30 AL, hardness 30-32 HRC and 38-42 HRC

STANDARD DIMENSIONS:

THICKNESS		WIDTH
mm	(inch)	mm	(inch)
0.8	(0.032)	50 & 75	(2&3)
1.2	(0.050)	50 & 75	(2&3)

KEY FEATURES:
Continuous length to individual specification
Rolled surface, even and perfectly straight
Bevel Angle from 18 deg to 90 deg
Rebate or groove

RIVETING Ready for use with rivets, clips and washers. Profiles suit all holder systems